Vozila

The scope of CCC certification for motor vehicles shall be in accordance with the requirements of the Implementing Rules for vehicles of category M, N and O (including complete vehicles and non-integrated vehicles). The certification according to the general safety standards eg GB 7258 "technical requirements for the safe operation of motor vehicles", For specific product inspection articles, please refer to the implementation rules of CNCA-C11-01: 2014 Automotive Annex 1 Type Test Projects and Standards.

1, How long does it take from the application to the receipt of the certificate?

90 days are set by law for cetification. According to experience, these sometimes take longer.

* it could result in a delay in processing:

if application documents are not complete,

if there are problems with testing in the Test Lab,

if there is a deviation in the audit.

Source: CCAP-C11-01: 2014 / A1 page 4, item 6.2

2, How often does factory audit take place?

Plant is classified after the initial audit in A, B, C, D.

A: Factory audit takes place once every 2 years.

B or C: Factory audit takes place once a year.

D: Factory audit takes place at least twice a year.

Source: CCAP-C11-01: 2014 / A1 Page 2, Point 4.2, CCAP-C11-01: 2014 / A1 Page 13, Point 10.2

3, how many audit days are there at the Inital Audit or the FU Audit?

Initial Audit: up to 10 man day per model series, depending of subparts certified

FI audit: up to 6 man day per model series

Source: CCAP-C11-01: 2014 / A1 page 9, clause 9.2.1.2,

CCAP-C11-01: 2014 / A1 page 14, item 10.3.2

4, how is the audit conducted?

Factory audit is performed according to IR CNCA-C11-01 Appendix 5

- Responsibility of quality manager: Appointment letter and service description (creation of control documents, management of change, complaint, CCC mark, CCC certificate status, etc.)

-Technical documentation: management of technical documents, control plan, product standard, product description of existing / new products, etc.

-Overview control: control of property, model and supplier of core material and core components, etc.

- Checking product compliance: running tests, final tests, etc.

Review of production process compliance: review of product structure, material and component, conformity of core production process, etc.

Product Check: Requalification Test

Change control: control of change request, etc.

Control of serious quality problems: customer complaint, recall, etc.

Source: IR CNCA-C11-01 Appendix 5

5, which application documents should be submitted to the initial audit?

  1. Application form
  2. License in copy-Vprašalnik s kratkimi informacijami o podjetju, proizvodnem procesu, seznamu osnovnih proizvodnih zmogljivosti, seznamu osnovnih testnih instrumentov, dokazilom o registrirani blagovni znamki itd.
  3. Car structure and technical parameters
  4. COP control plan
  5. Declaration: how is type, series defined
  6. Declaration: how is VIN defined
  7. Explanation: we distinguish the different types by external marking
  8. Declaration: Operating instructions in Chinese
  9. COC certificate
  10. Review
  11. Quality Manual
  12. Quality system certificates in copy
  13. Etc.

Source: CCAP-C11-01: 2014 / A1 Page 22-23 Appendix 1

6, how is Unit (technical unit) defined?

Step 1: Group car first after series defined by manufacturer

Step 2: Units are removed from the same series

It can not be defined as a unit if:

- Car types are not the same (M1 - up to 9 seater, M2 - from 10 seats, M3, N1, N2, N3, O1, O2, O3, O4), see below 8.1.1, 8.1.2, 8.1.3.

- car series is not equal

- position of the engine is not equal (front, middle, rear)

- fuel is not equal (gasoline, diesel, gas, electricity, etc. Hybrid "gasoline + electric" is considered as same unit as gasoline engine, hybrid "diesel + electric" is considered as same unit as diesel engine)

- Drive is not equal (four-wheel, non-four-wheel)

- Sum of the axis is not equal

- Etc.

Within one unit:

- Vehicle outside dimension limit: 20%, longest <= shortest x 1.2

- Limit axle position, wheelbase: 15%, longest <= shortest x 1.15

- Limit parameters (total weight, distribution of front and rear axle): 20%

- Etc.

6.1 M1

Same design platform, structure from part before B pillar similar (sedan, station wagon, convertible with hardtop, convertible with folding roof, etc.)

Limit within one unit: Engine KW: 30%, Displacement: 20%

6.2 M2, M3, N1, N2, N3

Limit value for engine KW: 50%, engine capacity: 50%

Limit within one unit: total weight: 20%

Source: IR CNCA-C11-01 Appendix 2

7. Which tests are performed according to which GB standard?

See CCAP-C11-01: 2014 / A1 page 29-45

8, List of key component and materials:

See CCAP-C11-01: 2014 / A1 page 22-23 Appendix 1 page 24-27

CCC News

Posodobljena poslovna področja kitajskih certifikacijskih organov CCC Posodobljena poslovna področja kitajskih certifikacijskih organov CCC 2019, 09-14 - CNCA je na kitajski ccc izdala certifikacijska telesa za eksplozijo ...
Objavljeni novi kitajski standardi GB 10 Objavljeni novi kitajski standardi GB 10 2019, 08-16 - Po nedavnem tisku državnega sveta LRK, ...
Ustrezni proizvodi CCC za zaščito pred eksplozijo Ustrezni proizvodi CCC za zaščito pred eksplozijo 2019, 07-17 - po nedavni objavi CNCA, eksplozijske zaščite ...
374 nove in revidirane GB Standardi sprosti 374 nove in revidirane GB Standardi sprosti 2019, 07-09 - Po nedavnem tisku državnega sveta LRK, ...
173 nove in revidirane GB Standardi sprosti 173 nove in revidirane GB Standardi sprosti 2019, 06-16 - Po nedavnem tisku državnega sveta LRK, ...
posodobljeni so bili poslovni okviri akreditiranih preskuševalnih laboratorijev za izdelke CCC posodobljeni so bili poslovni okviri akreditiranih preskuševalnih laboratorijev za izdelke CCC 2019, 05-30 - glede na nedavno napoved CNCA, obseg poslovanja ...
Geely je ustanovil inženirski center za raziskave in razvoj v Nemčiji Geely je ustanovil inženirski center za raziskave in razvoj v Nemčiji 2019, 05-18 - Glede na China News Service Pekingu maja 16, da ...
Izvedena pravila za opremo mestnega železniškega tranzita Izvedena pravila za opremo mestnega železniškega tranzita 2019, 05-06 - Glede na nedavno objavo iz potrdila China ...
posodobljeni so bili poslovni okviri testnih laboratorijev za izdelke Kitajske CCC posodobljeni so bili poslovni okviri testnih laboratorijev za izdelke Kitajske CCC 2019, 04-29 - izbranih laboratorijev za kitajski CCC ...
21 nove in revidirane GB Standardi sprosti 21 nove in revidirane GB Standardi sprosti 2019, 04-19 - Po nedavnem tisku državnega sveta LRK, ...

Podpora

Unterstützung

Delaš na svojem ritmu. Svoje projekte lahko samostojno upravljate prek našega portala in se sprašujete o osebni podpori. Zato smo se zavezali k oblikovanju lastnih procesov

Spletna administracija

Spletna uprava

Ponujamo vam priložnost, da izvedete svoj certifikacijski postopek, ne da bi se morali odpovedati strokovnim znanjem ali izkušnjami zaposlenih. Spletni sistem je zasnovan za različne certifikate in vam ponuja zato sezname Pogosta vprašanja, kot tudi že pripravljene obrazce in tabele, kot tudi modul za razjasnitev odprtih vprašanj z enim od naših zaposlenih.

Spremenite certifikat

Spremenite certifikat

V našem hitrem času so spremembe v poslovnem življenju stalna spremljava. Lahko se zlomijo zelo hitro. Obstajajo notranji in zunanji razlogi za to. CS daje pregled skladnosti med spremembami.

Sodelovanje

sodelovanje

Imamo le omejen čas in finančno sposobnost ter želimo ponuditi celovito storitev, kooperacije pa imajo smisel samo med sorodnimi organizacijami. Ti imajo zanesljivo strukturo in dobro medosebno harmonijo.

Pojdi na vrh